How to ICED

Instruction Guide to Crystal Clear Ice Cubes

1. Before using your ICED Kit for the first time, wash and dry all the parts with soap and warm water, apart from the foam body + ICED case.
2. Put the plastic insert back into the foam body and fill it with water up to the fill line (about 2 inches from the top).
3. Snap the silicone moulds together and gently lower it into the water-filled plastic insert. The water should overflow slightly out into the top overflow fill holes. Add more water if needed to ensure overflow.
4. Put the product upright in the freezer for 24 to 30 hours. The freezing time may vary depending on your freezer. For optimal results, do not freeze for more than 30 hours.
5. Take the product out of the freezer and pull out the silicone mould by using the handles on both sides.
6. Very carefully separate the silicone moulds and place your crystal clear ice cubes into your favourite drink or store them in the freezer for later use.
7. To make another batch of crystal clear ice cubes, completely empty the plastic insert of any remaining water and ice. Wash and dry all the parts with soap and warm water. Repeat steps 2 to 6.

Using stored Crystal Clear Ice Cubes

For best results when using your stored crystal clear ice cubes, remove from freezer and allow them to sit for at least five minutes before placing them into your favourite drink. This will ensure your crystal clear ice cubes remain perfectly clear without cracking.